Welcome to ACME !
Jacky@acme-rp.com 86 - 769 - 82853088
News Home > News > Medical devices prototype is the fastest route to the production

Medical devices prototype is the fastest route to the production

There is an emerging trend in the medical companies to move devices into clinical trials as quickly as possible. For many companies, achieving a clinical proof-of-principle often represents the basis on which follow-on funding or business exit strategies depending on it. Hence, to bring products closer to the market, medical devices prototype is the fastest route to the production of devices to prove the adding value for clinical trials. The medical device industry’s requirements where prototypes are required in larger numbers is done through the statistical analysis of results gained from clinical trials and the device which succeeds to fulfills the specified requirements wins the race.


Medical devices are usually produced in low numbers by special manufacturing methods. Now, since the medical devices prototype is completely being applied to the products, the trend is changing slowly and steadily because no matter if you have the authority to produce devices suitable for clinical trials. Defining these units as prototypes in the purest sense of the term can be misleading for the patients. The approach is not a safe way to walk through the path rather medical devices prototype is a better way to judge.


Surgical Anesthesia Medical Devices Prototype



Home  |   Rapid Prototype  |   CNC Machining  |   Rapid Tooling  |   Plastic Injection Molding  |   About Us  |   Products  |   Service  |   News  |   Contact
Copyright ©Acme Mold Ltd. All Rights Reserved
粤ICP备09047752号