-
Injection Mould Tooling Basics(1)
4.1 Types of Moulds
An injection mould tool has two major purposes:
• It is the cavity into which the molten plastic is injected
• The surface of the tool acts as a heat exchanger (as the injected...
Date : 08/04/2022 | View : 97
-
Introduction to Plastics
2.1 Introduction
Plastics were originally seen as substitute products for traditional materials such as metal and wood.
However, now they have become as irreplaceable as the classic materials...
Date : 08/01/2022 | View : 90
-
Introduction to molds（2）
The control unit and control cabinet allow the machine operator to control and monitor the process.
Control systems will be discussed in Chapter 5.
The injection unit is there to melt and meter the material into...
Date : 07/26/2022 | View : 106
-
Introduction to molds（1）
1 Introduction
1.1 The Big Picture
When the Hyatt brothers, John and Isaiah, built and patented the first injection moulding machine in
1872, it is doubtful if they could possibly have imagined the...
Date : 07/23/2022 | View : 116
-
Precise-Cast Prototyping
The Fraunhofer Institute in Germany is one of the world's biggest research organizations concerned with materials and manufacturing. One method of production that has recently been developed by the...
Date : 07/19/2022 | View : 116
-
Sheet Metal Forming
Making objects from sheet metal is one of the earliest methods of human production. The Egyptians, for instance, made soft precious metals, such as gold, into sheets, from which they cut
sometimes...
Date : 07/14/2022 | View : 115
-
Wire EDM (Electrical Discharge Machining) and Cutting with Ram E
Designers are rediscovering the use of surface decoration as a valid form of design expression. Industrial techniques have been borrowed from engineering applications and are used to create highly...
Date : 07/13/2022 | View : 120
-
Water-Jet Cutting AKE Hydrodynamic Machining
From as early as the mid-nineteenth century, water jets have been used as a method of removing materials during mining. The modern-day process (also known as hydrodynamic machining) has been cranked up...
Date : 07/09/2022 | View : 126
-
Die Cutting
The simplest analogy for this process is to think of a biscuit-cutter for making shapes from dough in the kitchen. Just as easily applied to paper or plastic,die cutting is a simple process...
Date : 07/07/2022 | View : 132
-
Difference between Die Casting and Lost-wax casting
Both of the two processes belong to precision casting, which are quite different. They are two completely different casting processes.
Die casting is to pour the molten metal into the steel mold on the...
Date : 07/05/2022 | View : 151
Displaying 11 to 20 (of 129 Information)
Injection Mould Tooling Basics(1) 4.1 Types of Moulds An injection mould tool has two major purposes: • It is the cavity into which the molten plastic is injected • The surface of the tool acts as a heat exchanger (as the injected... Date : 08/04/2022 | View : 97
Introduction to Plastics 2.1 Introduction Plastics were originally seen as substitute products for traditional materials such as metal and wood. However, now they have become as irreplaceable as the classic materials... Date : 08/01/2022 | View : 90
Introduction to molds（1） 1 Introduction 1.1 The Big Picture When the Hyatt brothers, John and Isaiah, built and patented the first injection moulding machine in 1872, it is doubtful if they could possibly have imagined the... Date : 07/23/2022 | View : 116
Precise-Cast Prototyping The Fraunhofer Institute in Germany is one of the world's biggest research organizations concerned with materials and manufacturing. One method of production that has recently been developed by the... Date : 07/19/2022 | View : 116
Sheet Metal Forming Making objects from sheet metal is one of the earliest methods of human production. The Egyptians, for instance, made soft precious metals, such as gold, into sheets, from which they cut sometimes... Date : 07/14/2022 | View : 115
Wire EDM (Electrical Discharge Machining) and Cutting with Ram E Designers are rediscovering the use of surface decoration as a valid form of design expression. Industrial techniques have been borrowed from engineering applications and are used to create highly... Date : 07/13/2022 | View : 120
Water-Jet Cutting AKE Hydrodynamic Machining From as early as the mid-nineteenth century, water jets have been used as a method of removing materials during mining. The modern-day process (also known as hydrodynamic machining) has been cranked up... Date : 07/09/2022 | View : 126
Die Cutting The simplest analogy for this process is to think of a biscuit-cutter for making shapes from dough in the kitchen. Just as easily applied to paper or plastic,die cutting is a simple process... Date : 07/07/2022 | View : 132
Difference between Die Casting and Lost-wax casting Both of the two processes belong to precision casting, which are quite different. They are two completely different casting processes. Die casting is to pour the molten metal into the steel mold on the... Date : 07/05/2022 | View : 151
